Afleveringen
-
Zijn er afleveringen die ontbreken?
-
In the complex world of hospital maintenance, how do steam boilers stay efficient and compliant amidst the labyrinth of water treatment regulations? The latest episode of the Chem-Aqua podcast "Water Solutions" explores the role of neutralizing amines in preventing corrosion in hospital steam systems.
This episode highlights not just the science behind these compounds but also the critical regulatory standards that govern their use, such as ASHRAE 170-2013 and FDA regulation 21 CFR 173.310.
It's a narrative that intertwines the technical with the regulatory, emphasizing the importance of both in maintaining safe and efficient hospital operations. This insightful discussion by Chem-Aqua highlights the delicate balance between adhering to health standards and ensuring the longevity of crucial hospital equipment.
"Neutralizing means are essential for effectively controlling corrosion, but they must be properly applied and monitored to meet regulatory guidelines," Chem-Aqua said.
-
Boiler scale is a significant issue impacting energy efficiency and operational costs in various industries. In a brief segment from Chem-Aqua's series "Water Solutions," some light was shed on the costly consequences of scale deposits in steam boilers. Host Gabrielle Bejarano emphasized the imminence of effective water treatment strategies to mitigate these costs.
In the episode, Bejarano further discussed the intricacies of boiler scale, its formation, and the resulting inefficiencies. This gave a look into how scale deposits act as insulators, reducing heat transfer efficiency, and leading to increased fuel usage, higher maintenance needs, and potential equipment failure. These challenges highlight the value of Chem-Aqua's century-long expertise in water treatment, offering viewers actionable solutions to optimize boiler performance and longevity.
-
Author: ChemAqua
In the latest episode of Water Solutions by Chem-Aqua, a critical aspect of air conditioning maintenance is brought into focus. This discussion highlights how overlooked AC coil cleaning can lead to significant costs and efficiency losses.
This episode centers on the often-neglected task of cleaning air conditioning (AC) coils, crucial for maintaining system efficiency and indoor air quality. The show delves into the challenges of AC coil cleaning, the adverse effects of dirty coils, and introduces Chem-Aqua's innovative and non-damaging coil cleaning solution. This solution not only enhances the performance of AC systems but also curtails operational costs and extends the life of the equipment.
-
This episode focuses on an innovative approach to water conservation in the dairy industry. The show examined the potential of reusing Condensate of Whey (COW) water, a byproduct of dairy processing, and highlighted some of its economic and environmental benefits.
Hosted by Dani Waddell, the informative episode also featured insights from expert Tim Daniels. Waddell further covered the practical aspects of recycling COW water for various uses such as systems management and plant maintenance. She also discussed regulatory standards, treatment methods, and the importance of water quality management in these applications. COW water has quite a lot of benefits when reused and has promising goals for the dairy industry.
-
With winter on the horizon, safeguarding cooling towers against freezing temperatures is not just crucial for maintaining operations—it's a strategic imperative for businesses. The cost of inaction can be substantial, ranging from operational disruptions to significant repair expenses. Chem-Aqua tells us how to prepare cooling towers for winter and navigate the cooler months without incident.
To prepare cooling towers for the winter season, facility managers must hold regular inspections, take proactive cold weather protocols, maintain heat loads and flow rates, and manage airflow. Chem-Aqua also emphasizes the severe implications of ice formation on operational efficiency and structural integrity, and provides a comprehensive approach to prevent potential damage, ensuring your cooling systems remain functional and safe in freezing conditions.
-
Boiler water carryover can cause deposits to form in valves, heat exchangers, turbines, and superheaters. If deposits are significant, heat transfer and/or turbine efficiency may be reduced. Additionally, carryover can strip away the protective magnetic layer on steam lines, remove the film formed by filming amine programs, cause erosion-induced corrosion, and result in product quality problems in processes using live steam.
-
Read more about how to prepare your cooling tower for winter here: https://www.chemaqua.com/en-us/Blogs/how-to-prepare-your-cooling-towers-for-winter
-
Read more about how to prepare your boiler for an inspection here: https://www.chemaqua.com/en-us/Blogs/how-to-prepare-your-boiler-for-an-inspection
-
Spring brings a variety of challenges in keeping cooling towers clean. There are ways to fight back. Screens and physical barriers provide protection before debris enters the cooling tower. Filtration and chemical treatment programs can help. Specialty agent chemicals can help remove tough to remove particles.
-
In the spring, your cooling tower faces a barrage of tough conditions. Late winter weather can be an issue, but the small particles that infiltrate your system could be costly. Regularly scheduled spring maintenance and chemical treatments can eliminate buildup in your system. ChemAqua’s Services team can manage cleanings and disinfection processes. Visit ChemAqua to learn more.
-
Keeping your cooling tower clean is imperative, but spring brings new challenges. Heavy storms, late winter weather, and airborne materials can wreak havoc on your cooling tower. Tree seed formation is a common issue, and Cottonwood trees being a major instigator. Seed casings and other contaminants can block inlet airways. Call Chem-Aqua Today To Learn How To Fight Back.
-
Addressing Stagnant Water in Buildings Due to COVID-19 Shutdown
-
Cycles of concentration, or often stated as just cycles, is a core concept when controlling boiler or cooling tower water systems. Running cycles too high can lead scale and corrosion. Running cycles too low can lead to wasted water.
But what is really meant by the phrase “cycles of concentration?” Basically, it is telling us how many times the water in the boiler or cooling tower has been concentrated compared to the makeup water.
The next logical question may be “What do you mean by the water being concentrated in boilers or cooling towers?”
Both boilers and cooling towers function by evaporating water. In a boiler, fuel is burned to turn water into steam. In a cooling tower, evaporation occurs as air is blown across the water to remove the heat picked up from air conditioning a building or cooling a manufacturing process.
As water is evaporated in both the boiler and cooling tower systems, primarily only pure water leaves the system. Other impurities, such as calcium, sodium, and chlorides, are left behind and concentrate in the remaining liquid water. Imagine boiling a pot of water on the stove until only a fraction of the water is left. This remaining water will start to look cloudy as impurities are concentrated.
Also, as water evaporates, fresh makeup water must be added to the boiler or cooling tower system to maintain water levels so they do not run dry. As you may imagine, the makeup water brings more impurities into the system to be left behind as water evaporates.You now may be wondering, “Why do I care about cycles of concentration?”
First, if certain impurities concentrate too much in water, they can precipitate out of solution and form insulating scale, which can lead to greater fuel consumption, higher energy costs, plugged piping, corrosion, and more. Second, there is an upper limit on where a boiler or cooling tower can be operated without forming scale. Third, operating too far below this limit only wastes water and increases the total cost of operation.
“How are cycles of concentration controlled?” Cycles are controlled by wasting or blowing down a portion of the concentrated boiler or cooling tower water and replacing it with fresh makeup water diluting the impurities.
Typically, this process is automated with controllers and monitored by periodic analytical testing.
Optimizing your cycles of concentration can help reduce wasted water, minimize scale and corrosion potential, and more.
To maximize your savings, contact Chem-Aqua today.
-
HVAC systems work tirelessly to heat, cool, and clean the air we breathe. But too often, critical components fail to receive regular maintenance, and the consequences are costly.
Over time, condenser, evaporator, and air handler coils accumulate dirt, grease, and bacteria from the air and environment. Without proper cleaning, this buildup compromises efficiency and effective operation.
When a unit struggles to cool air effectively, it runs overtime, shortening the overall life-span of the equipment while racking up high energy bills. In fact, according to The U.S. Department of Energy, a dirty condenser coil can increase compressor energy consumption by 30%.
More than just a burden to your budget, dirty evaporator or air handler coils can lead to bad air quality. When the coils are dirty and working poorly, the air becomes more damp and humid. Per the United States Environmental Protection Agency, humidity above 60% can lead to mold and mildew growth, a danger to human health and immune systems.
So, how do you clean your HVAC system coils safely and effectively? Because improper coil cleaning can actually damage a unit, it’s best to leave this job to the professionals. Chem-Aqua uses specific water pressure and water volume combined with a non-acid based cleaning solution, ensuring that coils are safely cleaned and enhanced.
Experience the benefit of increased air flow while extending the life of your HVAC system. Schedule regular coil cleanings with Chem-Aqua.
-
When it comes to air conditioning, heating, and refrigeration, energy consumption for industrial chillers is at an all time high. Typically chillers can account for over 50% of the electricity used in a single facility.
It goes without saying, that an inefficient chiller can be catastrophically wasteful and economically costly to a business, which makes monitoring this machine’s performance essential to saving money, time, and resources.
Ensure a chiller works safely and reliably every time by learning the signs of operation failure on this Water Droplet, a quick news minute from Chem-Aqua's Water Solutions podcast. In just 3 minutes, learn and understand “chiller approach temperature,” and why it’s crucial to keeping costly refrigeration equipment in peak working condition.
-
Outbreaks of disease are always an intriguing and worrying topic with the public, and the widespread news of some very high profile cases regarding water treatment, both in New York City and Flint, Michigan, have left people concerned about water treatment, Legionnaires disease and the need for stricter laws and better practices concerning water management technology.On today’s inaugural episode of Water Solutions with Chem-Aqua, Daniel Litwin, the Voice of B2B, talks with Chem-Aqua Engineering Manager, Jerry Angelilli, about industrial and commercial water treatment, and what improvements have been made to the equipment itself.Angelilli is on the Association of Water Technology’s Technical Committee and is Chair of the Boiler Subcommittee. There, he gets consistent information regarding the latest and greatest innovations in boiler technology. The focus lately has been on how the industry treats piping to protect it from corrosion, mostly using chemicals called amines to treat the steam condensation systems, as well as the boilers themselves.There have been standard technologies and best practices for many years to protect against corrosion and scale. Namely, not putting hard water in your boiler. Hard water is water that contains a higher level of calcium and magnesium, and water with those chemicals removed is what we’ve known to call soft water. When water in a boiler concentrates as steam is made, solids are left behind, so deposit inhibitors and rust and corrosion inhibitors need to be applied to help maintain the boiler’s integrity.Boilers are only a small example of how water technology is changing. With the integration of higher quality sensors and proactive monitoring software, treatment facilities are able to detect potential hazards earlier in the process. But as we've seen, even the slightest imbalance in pH, chemicals or water source can drastically affect the flow of clean water.Angelilli explains how this is motivating facility manager to treat water at the end of its journey: right before it comes out of the tap. This is becoming easier as chemical treatment standards have become more efficient and accessible. Though it may seem backwards to put the responsibility to sanitize water on the end-user, the lengthy trip that water takes from its initial source to filling a glass naturally creates more chances for that water to pick up sediment, pathogens and chemicals.
-
(This podcast was originally conducted for MarketScale's Building Management Podcast.)
This episode of MarketScale's Building Management Podcast explores an interesting cause and effect within the industry. In the last several years, the push for more green water conservation initiatives has created an unexpected issue in home and building water supplies. With conservative toilet flushes, low-flow shower heads, and automatic sinks, water is left sitting in piping for longer periods of time, creating perfect environments for waterborne pathogens to thrive.
This issue has appeared almost parallel to another evolution in the Industrial Water Treatment Industry, one that’s putting a focus on public health instead of just asset management. In this episode of the Building Management podcast, we continue our discussion on pathogens that exist within our water supplies, and how they’re causing a ripple effect that changing the Commercial, Hospitatlity, Real Estate, and Tourism industries. Chem-Aqua’s Manager of Water Risk Management Services Group, Dominck Tuzzo explains how competing interests complicate solving the pathogen problem and the risk that now presents itself to building owners and facility managers.
“Man-made premise plumbing systems are the perfect breeding ground for these Opportunistic Premise Plumbing Pathogens, or OPPPs, to breed, colonize, and rapidly amplify in our building systems,” said Tuzzo. He also makes the argument that efficiency is not always the safest option for the consumer. Tuzzo elaborates on the Legionnaire’s outbreak in the 2010s, the rise in energy saving technology, and the shift in responsibility in the industry. -
(This podcast was originally conducted for MarketScale's Building Management Podcast.)
Imagine a building undergoing renovations, needing to shut off some water pipes and therefore leading to a dead leg of piping. Now imagine, once the renovations are completed, that water is flushed right back into the system. You may have just put a pathogen in your entire building’s water supply. When it comes to water treatment, whether on a domestic or processing side, simple choices can have drastic effects, for better or for worse, and no one knows this better than our guest today, Tony Self.
“As water flows past that dead-leg, it will pick up whatever pathogens may be growing there. It just needs an opportunity for somebody to become exposed,” Self said. Self, Director of Engineering for Chem-Aqua Incorporated, came on this episode of MarketScale's Building Management Podcast to discuss the challenges that come with keeping both consumers and workers safe around potential water pathogens, the effect of increases in government regulation on small businesses, and how users and facility operators can make small decisions to have big, positive impacts.
