Afleveringen
-
Improving Performance in Java: TOPCAT and STILTS by Mark Taylor. on Wednesday 30 November
TOPCAT and STILTS are mature Java desktop applications for working with
tabular data that have always had a focus on efficiency for large or very large
data sets. This paper presents some progress, experience and lessons learned
from efforts over recent years to improve performance further by multithreading
key algorithms as well as other strategies.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16913v1 -
The Spectroscopic Classification of Astronomical Transients SCAT Survey: Overview, Pipeline Description, Initial Results, and Future Plans by M. A. Tucker et al. on Wednesday 30 November
We present the Spectroscopic Classification of Astronomical Transients (SCAT)
survey, which is dedicated to spectrophotometric observations of transient
objects such as supernovae and tidal disruption events. SCAT uses the SuperNova
Integral-Field Spectrograph (SNIFS) on the University of Hawai'i 2.2-meter
(UH2.2m) telescope. SNIFS was designed specifically for accurate transient
spectrophotometry, including absolute flux calibration and host-galaxy removal.
We describe the data reduction and calibration pipeline including spectral
extraction, telluric correction, atmospheric characterization, nightly
photometricity, and spectrophotometric precision. We achieve $\lesssim 5\%$
spectrophotometry across the full optical wavelength range ($3500-9000~\r{A}$)
under photometric conditions. The inclusion of photometry from the SNIFS
multi-filter mosaic imager allows for decent spectrophotometric calibration
($10-20\%$) even under unfavorable weather/atmospheric conditions. SCAT
obtained $\approx 640$ spectra of transients over the first 3 years of
operations, including supernovae of all types, active galactic nuclei,
cataclysmic variables, and rare transients such as superluminous supernovae and
tidal disruption events. These observations will provide the community with
benchmark spectrophotometry to constrain the next generation of hydrodynamic
and radiative transfer models.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2210.09322v2 -
Zijn er afleveringen die ontbreken?
-
The performance of the MAGIC telescopes using deep convolutional neural networks with CTLearn by T. Miener et al. on Wednesday 30 November
The Major Atmospheric Gamma Imaging Cherenkov (MAGIC) telescope system is
located on the Canary Island of La Palma and inspects the very high-energy
(VHE, few tens of GeV and above) gamma-ray sky. MAGIC consists of two imaging
atmospheric Cherenkov telescopes (IACTs), which capture images of the air
showers originating from the absorption of gamma rays and cosmic rays by the
atmosphere, through the detection of Cherenkov photons emitted in the shower.
The sensitivity of IACTs to gamma-ray sources is mainly determined by the
ability to reconstruct the properties (type, energy, and arrival direction) of
the primary particle generating the air shower. The state-of-the-art IACT
pipeline for shower reconstruction is based on the parameterization of the
shower images by extracting geometric and stereoscopic features and machine
learning algorithms like random forest or boosted decision trees. In this
contribution, we explore deep convolutional neural networks applied directly to
the pixelized images of the camera as a promising method for IACT full-event
reconstruction and present the performance of the method on observational data
using CTLearn, a package for IACT event reconstruction that exploits deep
learning.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16009v1 -
Laue lenses: Focusing optics for hard X soft Gamma-ray Astronomy by L Ferro et al. on Wednesday 30 November
Hard X-/soft Gamma-ray astronomy is a key field for the study of important
astrophysical phenomena such as the electromagnetic counterparts of
gravitational waves, gamma-ray bursts, black holes physics and many more.
However, the spatial localization, imaging capabilities and sensitivity of the
measurements are strongly limited for the energy range $>$70 keV due to the
lack of focusing instruments operating in this energy band. A new generation of
instruments suitable to focus hard X-/ soft Gamma-rays is necessary to shed
light on the nature of astrophysical phenomena which are still unclear due to
the limitations of current direct-viewing telescopes. Laue lenses can be the
answer to those needs. A Laue lens is an optical device consisting of a large
number of properly oriented crystals which are capable, through Laue
diffraction, of concentrating the radiation into the common Laue lens focus. In
contrast with the grazing incidence telescopes commonly used for softer X-rays,
the transmission configuration of the Laue lenses allows us to obtain a
significant sensitive area even at energies of hundreds of keV. At the
University of Ferrara we are actively working on the modelization and
construction of a broad-band Laue lens. In this work we will present the main
concepts behind Laue lenses and the latest technological developments of the
TRILL (Technological Readiness Increase for Laue Lenses) project, devoted to
the advancement of the technological readiness of Laue lenses by developing the
first prototype of a lens sector made of cylindrical bent crystals of
Germanium.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16880v1 -
Satellite Constellation Avoidance with the Rubin Observatory Legacy Survey of Space and Time by Jinghan Alina Hu et al. on Wednesday 30 November
We investigate a novel satellite avoidance strategy to mitigate the impact of
large commercial satellite constellations in low-Earth orbit on the Vera C.
Rubin Observatory Legacy Survey of Space and Time (LSST). We simulate the
orbits of currently planned Starlink and OneWeb constellations ($\sim$40,000
satellites) to test how effectively an upgraded Rubin scheduler algorithm can
avoid them, and assess how the overall survey is affected. Given a reasonably
accurate satellite orbit forecast, we find it is possible to adjust the
scheduler algorithm to effectively avoid some satellites. Overall, sacrificing
10% of LSST observing time to avoid satellites reduces the fraction of LSST
visits with streaks by a factor of two. Whether such a mitigation will be
required depends on the overall impact of streaks on science, which is not yet
well quantified. This is due to a lack of adequate information about satellite
brightness distributions as well as the impact of glints and low surface
brightness residuals on alert purity and systematic errors in cosmological
parameter estimation. A significant increase in the number of satellites or
their brightness during Rubin Operations may make implementing this satellite
avoidance strategy worthwhile.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15908v1 -
The MUSE second-generation VLT instrument by Bacon R. et al. on Wednesday 30 November
The Multi Unit Spectroscopic Explorer (MUSE) is a second-generation VLT
panoramic integral-field spectrograph currently in manufacturing, assembly and
integration phase. MUSE has a field of 1x1 arcmin2 sampled at 0.2x0.2 arcsec2
and is assisted by the VLT ground layer adaptive optics ESO facility using four
laser guide stars. The instrument is a large assembly of 24 identical high
performance integral field units, each one composed of an advanced image
slicer, a spectrograph and a 4kx4k detector. In this paper we review the
progress of the manufacturing and report the performance achieved with the
first integral field unit.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16795v1 -
Bayesian modelling of scattered light in the LIGO interferometers by Rhiannon Udall et al. on Wednesday 30 November
Excess noise from scattered light poses a persistent challenge in the
analysis of data from gravitational wave detectors such as LIGO. We integrate a
physically motivated model for the behavior of these "glitches" into a standard
Bayesian analysis pipeline used in gravitational wave science. This allows for
the inference of the free parameters in this model, and subtraction of these
models to produce glitch-free versions of the data. We show that this inference
is an effective discriminator of the presence of the features of these
glitches, even when those features may not be discernible in standard
visualizations of the data.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15867v1 -
Panel Discussion: Practical Problem Solving for Machine Learning by Guillermo Cabrera et al. on Wednesday 30 November
Machine Learning is a powerful tool for astrophysicists, which has already
had significant uptake in the community. But there remain some barriers to
entry, relating to proper understanding, the difficulty of interpretability,
and the lack of cohesive training. In this discussion session we addressed some
of these questions, and suggest how the field may move forward.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16782v1 -
Using a Conditional Generative Adversarial Network to Control the Statistical Characteristics of Generated Images for IACT Data Analysis by Julia Dubenskaya et al. on Wednesday 30 November
Generative adversarial networks are a promising tool for image generation in
the astronomy domain. Of particular interest are conditional generative
adversarial networks (cGANs), which allow you to divide images into several
classes according to the value of some property of the image, and then specify
the required class when generating new images. In the case of images from
Imaging Atmospheric Cherenkov Telescopes (IACTs), an important property is the
total brightness of all image pixels (image size), which is in direct
correlation with the energy of primary particles. We used a cGAN technique to
generate images similar to whose obtained in the TAIGA-IACT experiment. As a
training set, we used a set of two-dimensional images generated using the TAIGA
Monte Carlo simulation software. We artificiallly divided the training set into
10 classes, sorting images by size and defining the boundaries of the classes
so that the same number of images fall into each class. These classes were used
while training our network. The paper shows that for each class, the size
distribution of the generated images is close to normal with the mean value
located approximately in the middle of the corresponding class. We also show
that for the generated images, the total image size distribution obtained by
summing the distributions over all classes is close to the original
distribution of the training set. The results obtained will be useful for more
accurate generation of realistic synthetic images similar to the ones taken by
IACTs.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15807v1 -
Spectroscopic time series performance of the Mid-Infrared Instrument on the JWST by Jeroen Bouwman et al. on Wednesday 30 November
We present here the first ever mid-infrared spectroscopic time series
observation of the transiting exoplanet \object{L 168-9 b} with the
Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope. The data were
obtained as part of the MIRI commissioning activities, to characterize the
performance of the Low Resolution Spectroscopy (LRS) mode for these challenging
observations. To assess the MIRI LRS performance, we performed two independent
analyses of the data. We find that with a single transit observation we reached
a spectro-photometric precision of $\sim$50 ppm in the 7-8~\micron~range at
R=50, consistent with $\sim$25 ppm systematic noise. The derived band averaged
transit depth is 524~$\pm$~15~ppm and 547~$\pm$~13~ppm for the two applied
analysis methods, respectively, recovering the known transit depth to within
1~$\sigma$. The measured noise in the planet's transmission spectrum is
approximately 15-20\% higher than random noise simulations over wavelengths
$6.8 \lesssim \lambda \lesssim 11$ $\mu$m. We observed an excess noise at
shorter wavelengths, for which possible causes are discussed. This performance
was achieved with limited in-flight calibration data, demonstrating the future
potential of MIRI for the characterization of exoplanet atmospheres.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16123v1 -
JWST NIRCam Defocused Imaging: Photometric Stability Performance and How it Can Sense Mirror Tilts by Everett Schlawin et al. on Wednesday 30 November
We use JWST NIRCam short wavelength photometry to capture a transit
lightcurve of the exoplanet HAT-P-14 b to assess performance as part of
instrument commissioning. The short wavelength precision is 152 ppm per 27
second integration as measured over the full time series compared to a
theoretical limit of 107 ppm, after corrections to spatially correlated 1/f
noise. Persistence effects from charge trapping are well fit by an exponential
function with short characteristic timescales, settling on the order of 5-15
minutes. The short wavelength defocused photometry is also uniquely well suited
to measure the realtime wavefront error of JWST. Analysis of the images and
reconstructed wavefront maps indicate that two different hexagonal primary
mirror segments exhibited "tilt events" where they changed orientation rapidly
in less than ~1.4 seconds. In some cases, the magnitude and timing of the flux
jumps caused by tilt events can be accurately predicted with a telescope model.
These tilt events can be sensed by simultaneous longer-wavelength NIRCam grism
spectral images alone in the form of changes to the point spread function,
diagnosed from the FWHM. They can also be sensed with the FGS instrument from
difference images. Tilt events possibly from sudden releases of stress in the
backplane structure behind the mirrors were expected during the commissioning
period because they were found in ground-based testing. Tilt events have shown
signs of decreasing in frequency but have not disappeared completely. The
detectors exhibit some minor (less than 1%) deviations from linear behavior in
the first few groups of each integration, potentially impacting absolute fluxes
and transit depths on bright targets where only a handful of groups are
possible. Overall, the noise is within 50% of the theoretical photon noise and
read noise. This bodes well for high precision time series measurements.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16727v1 -
Adding Workflow Management Flexibility to LSST Pipelines Execution by Michelle Gower et al. on Wednesday 30 November
Data processing pipelines need to be executed at scales ranging from small
runs up through large production data release runs resulting in millions of
data products. As part of the Rubin Observatory's pipeline execution system,
BPS is the abstraction layer that provides an interface to different Workflow
Management Systems (WMS) such as HTCondor and PanDA. During the submission
process, the pipeline execution system interacts with the Data Butler to
produce a science-oriented execution graph from algorithmic tasks. BPS converts
this execution graph to a workflow graph and then uses a WMS-specific plugin to
submit and manage the workflow. Here we will discuss the architectural design
of this interface and report briefly on the recent production of the Data
Preview 0.2 release and how the system is used by pipeline developers.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15795v1 -
3UCubed: The IMAP Student Collaboration CubeSat Project by Marcus Alfred et al. on Wednesday 30 November
The 3UCubed project is a 3U CubeSat being jointly developed by the University
of New Hampshire, Sonoma State University, and Howard University as a part of
the NASA Interstellar Mapping and Acceleration Probe, IMAP, student
collaboration. This project comprises of a multidisciplinary team of
undergraduate students from all three universities. The mission goal of the
3UCubed is to understand how Earths polar upper atmosphere the thermosphere in
Earths auroral regions, responds to particle precipitation and solar wind
forcing, and internal magnetospheric processes.
3UCubed includes two instruments with rocket heritage to achieve the science
mission: an ultraviolet photomultiplier tube, UVPMT, and an electron retarding
potential analyzer ERPA. The spacecraft bus consists of the following
subsystems: Attitude Determination and Control, Command and Data Handling,
Power, Communication, Structural, and Thermal.
Currently, the project is in the post-PDR stage, starting to build and test
engineering models to develop a FlatSat prior to critical design review in
2023. The goal is to launch at least one 3U CubeSat to collect science data
close to the anticipated peak of Solar Cycle 25 around July 2025. Our mother
mission, IMAP, is also projected to launch in 2025, which will let us jointly
analyze the science data of the main mission, providing the solar wind
measurements and inputs to the magnetosphere with that of 3UCubed, providing
the response of Earths cusp to these inputs.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15781v1 -
Optimal frequency-domain analysis for spacecraft time series: Introducing the missing-data multitaper power spectrum estimator by Sarah E. Dodson-Robinson et al. on Wednesday 30 November
While the Lomb-Scargle periodogram is foundational to astronomy, it has a
significant shortcoming: its variance does not decrease as more data are
acquired. Statisticians have a 60-year history of developing
variance-suppressing power spectrum estimators, but most are not used in
astronomy because they are formulated for time series with uniform observing
cadence and without seasonal or daily gaps. Here we demonstrate how to apply
the missing-data multitaper power spectrum estimator to spacecraft data with
uniform time intervals between observations but missing data during thruster
fires or momentum dumps. The F-test for harmonic components may be applied to
multitaper power spectrum estimates to identify statistically significant
oscillations that would not rise above a white noise-based false alarm level.
Multitapering improves the dynamic range of the power spectrum estimate and
suppresses spectral window artifacts. We demonstrate multitapering on
simultaneous measurements of the interplanetary magnetic field and the solar
10.7-cm radio flux, finding high coherence at frequencies associated with the
sun's activity cycle and quasibiennial oscillations. Next we show that the
multitaper--F-test combination applied to Kepler observations of KIC 6102338
detects differential rotation without requiring iterative sinusoid fitting and
subtraction. Significant signals reside at harmonics of both rotation
frequencies and suggest an antisolar rotation profile. Finally, we demonstrate
the missing-data multitaper version of complex demodulation, which extracts the
low-frequency envelope from a modulated signal. We argue that multitaper power
spectrum estimators should be used for all time series with regular observing
cadence.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16549v1 -
Star & planet formation: Upcoming opportunities in the space-based infrared by Floris van der Tak. on Wednesday 30 November
While ALMA and JWST are revolutionizing our view of star and planet formation
with their unprecedented sensitivity and resolution at submillimeter and
near-IR wavelengths, many outstanding questions can only be answered with
observations in the thermal (mid- and far-) infrared domain. Many of these
questions require space-based observations, to achieve the necessary
sensitivity and/or wavelength coverage. In particular, how do interstellar
clouds develop filamentary structures and dense cores? What are the masses and
luminosities of objects at the earliest stages of star formation? What are the
gas masses of planet-forming disks, and how do these disks disperse during
planet formation? How is refractory and volatile material distributed within
the disks, and how does this evolve with time? This article reviews how
upcoming and planned balloon-borne and space-based telescopes for the mid- and
far-infrared will address these questions, and outlines which further missions
will be needed beyond 2030, when the ELTs will be in full operation.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15149v2 -
Estimating effective wind speed from Gemini Planet Imager's adaptive optics data using covariance maps by Daniel M. Levinstein et al. on Wednesday 30 November
The Earth's turbulent atmosphere results in speckled and blurred images of
astronomical objects when observed by ground based visible and near-infrared
telescopes. Adaptive optics (AO) systems are employed to reduce these
atmospheric effects by using wavefront sensors (WFS) and deformable mirrors.
Some AO systems are not fast enough to correct for strong, fast, high
turbulence wind layers leading to the wind butterfly effect, or wind-driven
halo, reducing contrast capabilities in coronagraphic images. Estimating the
effective wind speed of the atmosphere allows us to calculate the atmospheric
coherence time. This is not only an important parameter to understand for site
characterization but could be used to help remove the wind butterfly in post
processing. Here we present a method for estimating the atmospheric effective
wind speed from spatio-temporal covariance maps generated from pseudo open-loop
(POL) WFS data. POL WFS data is used as it aims to reconstruct the full
wavefront information when operating in closed-loop. The covariance maps show
how different atmospheric turbulent layers traverse the telescope. Our method
successfully recovered the effective wind speed from simulated WFS data
generated with the soapy python library. The simulated atmospheric turbulence
profiles consist of two turbulent layers of ranging strengths and velocities.
The method has also been applied to Gemini Planet Imager (GPI) AO WFS data.
This gives insight into how the effective wind speed can affect the wind-driven
halo seen in the AO image point spread function. In this paper, we will present
results from simulated and GPI WFS data.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16441v1 -
Estimating effective wind speed from Gemini Planet Imager's adaptive optics data using covariance maps by Daniel M. Levinstein et al. on Wednesday 30 November
The Earth's turbulent atmosphere results in speckled and blurred images of
astronomical objects when observed by ground based visible and near-infrared
telescopes. Adaptive optics (AO) systems are employed to reduce these
atmospheric effects by using wavefront sensors (WFS) and deformable mirrors.
Some AO systems are not fast enough to correct for strong, fast, high
turbulence wind layers leading to the wind butterfly effect, or wind-driven
halo, reducing contrast capabilities in coronagraphic images. Estimating the
effective wind speed of the atmosphere allows us to calculate the atmospheric
coherence time. This is not only an important parameter to understand for site
characterization but could be used to help remove the wind butterfly in post
processing. Here we present a method for estimating the atmospheric effective
wind speed from spatio-temporal covariance maps generated from pseudo open-loop
(POL) WFS data. POL WFS data is used as it aims to reconstruct the full
wavefront information when operating in closed-loop. The covariance maps show
how different atmospheric turbulent layers traverse the telescope. Our method
successfully recovered the effective wind speed from simulated WFS data
generated with the soapy python library. The simulated atmospheric turbulence
profiles consist of two turbulent layers of ranging strengths and velocities.
The method has also been applied to Gemini Planet Imager (GPI) AO WFS data.
This gives insight into how the effective wind speed can affect the wind-driven
halo seen in the AO image point spread function. In this paper, we will present
results from simulated and GPI WFS data.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16441v1 -
GECAM Localization of High Energy Transients and the Systematic Error by Yi Zhao et al. on Wednesday 30 November
Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor
(GECAM) is a pair of microsatellites (i.e. GECAM-A and GECAM-B) dedicated to
monitoring gamma-ray transients including gravitational waves high-energy
electromagnetic counterparts, Gamma-ray Bursts, Soft Gamma-ray Repeaters, Solar
Flares and Terrestrial Gamma-ray Flashes. Since launch in December 2020,
GECAM-B has detected hundreds of astronomical and terrestrial events. For these
bursts, localization is the key for burst identification and classification as
well as follow-up observations in multi-wavelength. Here, we propose a Bayesian
localization method with Poisson data with Gaussian background profile
likelihood to localize GECAM bursts based on the burst counts distribution in
detectors with different orientations. We demonstrate that this method can work
well for all kinds of bursts, especially for extremely short ones. In addition,
we propose a new method to estimate the systematic error of localization based
on a confidence level test, which can overcome some problems of the existing
method in literature. We validate this method by Monte Carlo simulations, and
then apply it to a burst sample with accurate location and find that the mean
value of the systematic error of GECAM-B localization is $\sim 2.5^{\circ}$. By
considering this systematic error, we can obtain a reliable localization
probability map for GECAM bursts. Our methods can be applied to other gamma-ray
monitors.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15570v1 -
FIREBall-2: flight preparation of a proven balloon payload to image the intermediate redshift circumgalactic medium by Vincent Picouet et al. on Wednesday 30 November
FIREBall-2 is a stratospheric balloon-borne 1-m telescope coupled to a UV
multi-object slit spectrograph designed to map the faint UV emission
surrounding z~0.7 galaxies and quasars through their Lyman-alpha line emission.
This spectro-imager had its first launch on September 22nd 2018 out of Ft.
Sumner, NM, USA. Because the balloon was punctured, the flight was abruptly
interrupted. Instead of the nominal 8 hours above 32 km altitude, the
instrument could only perform science acquisition for 45 minutes at this
altitude. In addition, the shape of the deflated balloon, combined with a full
Moon, revealed a severe off-axis scattered light path, directly into the UV
science detector and about 100 times larger than expected. In preparation for
the next flight, and in addition to describing FIREBall-2's upgrade, this paper
discusses the exposure time calculator (ETC) that has been designed to analyze
the instrument's optimal performance (explore the instrument's limitations and
subtle trade-offs).
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15491v1 -
A Bayesian approach to RFI mitigation by S. A. K. Leeney et al. on Wednesday 30 November
Radio Frequency Interference (RFI) is an endemic problem in radio astronomy.
Information in contaminated frequency channels is lost and it can lead to
significant systematic error if not properly modelled. In this paper we propose
a RFI mitigation methodology that takes a Bayesian approach, where contaminated
data is both flagged and managed as part of a single step fitting process. To
the authors knowledge, our approach is first-of-its-kind. We provide a
proof-of-concept of our methods which are also tested and shown to be effective
on both a simple toy model and when incorporated into the Bayesian data
analysis pipeline for REACH (a modern cosmological radio experiment).
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15448v1 - Laat meer zien
