Afleveringen

  • Ask Us Anything Extravaganza

    Ask Us Anything Extravaganza

    · CLAMP

    In this episode, we answer all but one of our remaining AUA questions. (with varying degrees of success) The last question from Brad Harrison will be its own episode!

    Question Askers:

    @time.capsule.scratch.builds@dwwoodbuilds@wafflebeaver@warrenmatten @plattevalleywoodworks

    Other Making Podcasts:

    Working Hands Making Problems to SolveWorkshop Therapy Two Thirds FocusedFools with Tools

    CLAMPmendations:

    Jessy: Runkle of the Bailey on YouTubeAdam: INSIDE by SidemenGrant: Shogun TV show

    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern



    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Do It For Yourself

    Do It For Yourself

    · CLAMP

    This week, Adam, Grant & Jessy discuss doing things for others versus doing things for yourself. Also, a G-rant about kitchen sink stoppers. And then we go on a sidequest trying to figure out which countries drive on which side of the road.

    Mentions:

    WhistlinDieselGnome Hammer Forge High Caliber Craftsman Dean Duplantis Twisted Twine Woodworking Woodland IronBlackthorn ConceptsHouseMadeJimmy DiResta Penolopy Bulnick

    CLAMPmendations:

    Adam - Killer Coffee CoJessy - Bodkin showGrant - Streetcraft


    Ask Us Anything question:

    "Do you know anyone that has gotten big commercial success from their project? Examples: tea cozies in every Walmart, dog toy design sold to a big pet brand, did evaporust start as someone's solution in their own basement? Or is any dream of this nought but a fictional pipe dream?" - @warrenmatten


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Zijn er afleveringen die ontbreken?

    Klik hier om de feed te vernieuwen.

  • Wabi-sabi & High Caliber Camp

    Wabi-sabi & High Caliber Camp

    · CLAMP

    In this episode, Grant does a recap of High Caliber Camp, Adam talks about his new python, and Jessy thinks aloud about making a new leather wallet. Then we get pretty deep into the topic of wabi-sabi and what exactly it is.

    Mentions:

    High Caliber CampHigh Caliber CraftsmanPaw Paw Ridge HomesteadGriffin Makesdean_duplantis lindsay_creative mossknives1oldschoolpirateBlackthorn Concepts Collin BuildsDeadriseWoodCraftsTwistedTwineWoodworking


    Ask Us Anything question:

    "What are your thoughts on the Japanese aesthetic of wabi-sabi?" - @dwwoodbuilds


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • The Beginning of the End

    The Beginning of the End

    · CLAMP

    We're throwing in the clamps! In this episode, we talk about things that we've stopped doing. Join us for job, RC, and collecting talk.

    Mentions:

    High Caliber CampMaker CampGriffin MakesMaking It podcast

    CLAMPmendations:

    Jessy: Autodesk Droid Maker ContestGrant: @crazytoyswebsiteAdam: Switchblade Pull Saw from AliExpress

    Ask Us Anything question:

    "Do you make extras every time you make something? (For example: five benches when a customer orders four) If so, has that worked out for you? Or it is more common to get stuck with the extras and have wasted the materials etc?" - @warrenmatten


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern




    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Our 2024 CLAMP Challenge Winner Is...

    Our 2024 CLAMP Challenge Winner Is...

    · CLAMP

    In this episode, we talk about our CLAMP Challenge builds and announce the winner!

    Links to entries:

    Ethan Carter Designs Griffin MakesaweirdguyCreative Designs by JeanneWarren Matten dwwoodbuilds

    Mentions:

    Gnome Hammer Forge cfb70oktechnocraftSTUDIOEmily Joyce Official

    CLAMPmendations:

    Jessy: Books and Bookshelves ContestGrant: Crude but Efficient Adam: Mythbusters TV show

    Ask Us Anything question:

    "If in some alternate universe you had to marry a maker, what type of maker would they be? Gardener? Brewer? Goldsmith? Content creator?" - @warrenmatten

    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern



    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Getting What You Pay For

    Getting What You Pay For

    · CLAMP

    In this episode, Adam, Grant & Jessy talk about getting what you pay for. Also discussed: flying drones and training simulators, 3D printer problems, and buying tools.

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout at https://chapmanmfg.com/

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Big thanks to Chapman Mfg, ISOtunes, HouseMade & aweirdguy for our prizes!

    Last day to enter is April 30th.

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    Mentions:

    Bambu 3D printersKeith of Working Hands Podcast Odyssey CNCHigh Caliber CraftsmanGnome Hamer Forge Making It Podcast Griffin Makes Broken Tooth Forge Creative Designs by Jeanne


    CLAMPmendations:

    Grant: Boondock Saints movie Jessy: Timber Rough (Instructables, Instagram)Adam: 12th Hour - I Remade GTA5


    Ask Us Anything question:

    "How often do you allow yourself time to sit quietly and remember the broad plan? We get so bogged down with making the next decision or dealing with the barriers to making, that we might not revisit the overall schema it fits in. The ultimate goal. Becoming world renowned for expertise; turning it into a business; raising kids that aren't fuckwits, making it to retirement. It's worth remembering your framework within which every smaller thing fits. So how often do you get to? Do you make time for it?" - @warrenmatten


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern




    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Under Pressure

    Under Pressure

    · CLAMP

    In this episode, Adam, Grant & Jessy discuss things they feel pressured to do. Also discussed: recycling and trash pickups, holidays in our different countries, sanding, and more!

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout at https://chapmanmfg.com/

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Big thanks to Chapman Mfg, ISOtunes, HouseMade & aweirdguy for our prizes!

    Last day to enter is April 30th.

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    Mentions:

    Jimmy Diresta Majid safety glasses/gogglesHigh Caliber CampGriffin MakesEthan Carter Designs Full Steam Design Dainer Made John Heisz - I Build It


    CLAMPmendations:

    Adam & Grant: Fallout TV showJessy: AVNJ


    Ask Us Anything:
    "Can a person be a member of the maker community without being a maker? Why or why not?" - @dwwoodbuilds


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Your Lack of Authenticity is Disturbing

    Your Lack of Authenticity is Disturbing

    · CLAMP

    In this episode, Adam, Grant and Jessy talk about creators that are authentic and creators that make them cringe from lack of sincerity. If you feel like talking sh*t, this is the episode for you!

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout at https://chapmanmfg.com/

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Big thanks to Chapman Mfg, ISOtunes, HouseMade & aweirdguy for our prizes!

    Last day to enter is April 30th.

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    Mentions:

    Bobby DukeVincent Ferrari / Digitally Creative podcast Cold OnesToo Scary, Didn't Watch podcast How RidiculousDude Perfet aweirdguyDave BauerHank Green


    CLAMPmendations:

    Jessy: Jude Pullen / Hey JudeAdam: Baseketball movieGrant: How I Fixed My Attention Span by Answer in Progress


    Ask Us Anything question:

    "WWJD - what would Jessy do?" - @warrenmatten


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • The Mysteries of Time Management

    The Mysteries of Time Management

    · CLAMP

    In this episode, Adam & Grant talk about time management and all the things that derail it. Also, our first official CLAMP Challenge entry for 2024!

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout at https://chapmanmfg.com/

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Big thanks to Chapman Mfg, ISOtunes, HouseMade & aweirdguy for our prizes!

    Last day to enter is April 30th.

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    Mentions:

    Bob of I Like to Make StuffMaking It podcastEthan Carter DesignsGnome Hammer Forge

    CLAMPmendations:

    Grant: Cloak and Dagger TV show Adam: Berchtold Designs (Check out the mallet Grant got here.)

    Ask Us Anything question:

    "Have you ever specialized in something, abandoned it, and then come back to it a decade later?" - @onewillow.forge

    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • I Think I Can, Therefore I Do Not

    I Think I Can, Therefore I Do Not

    · CLAMP

    In this episode, Adam, Grant & Jessy talk about getting stuck in the limbo of knowing you can probably do something, but not actually getting around to doing it. Also time versus value versus money and a couple tangents about cleaning and cooking.

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout at https://chapmanmfg.com/

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Big thanks to Chapman Mfg, ISOtunes, HouseMade & aweirdguy for our prizes!

    Last day to enter is April 30th.

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    Mentions:

    Justin McElroy of My Brother, My Brother, and MeBob of I Like to Make Stuff


    CLAMPmendations:

    Adam - Criminal Minds TV ShowGrant - new Road House movieJessy - Dragon's Dogma 2 video game


    Ask Us Anything question:

    "If you could have anyone as a CLAMP guest (living or dead) who would it be? Why?" - @dwwoodbuilds


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern



    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Sometimes It's Harder Than It Looks

    Sometimes It's Harder Than It Looks

    · CLAMP

    On this episode, Adam, Grant & Jessy talk about things that are harder or easier than they seem.

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout at https://chapmanmfg.com/

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Big thanks to Chapman Mfg, ISOtunes, HouseMade & aweirdguy for our prizes!

    Last day to enter is April 30th.

    βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†βˆ†

    Mentions:

    Ottowa Tool LibraryDean Duplantis Susan Duplantis - Hearth and Garden ArtMia MaplesMaking Our Way podcast High Caliber Craftsman


    CLAMPmendations:

    Jessy: Cookie Monster Fur Hat by heck yes artsGrant: Words n Wood Adam: Rex H


    Ask Us Anything:

    "Are taboo items more likely to be custom made than more accepted / common items?" - @warrenmatten


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Instructions Unclear with Jeff Stein aka aweirdguy

    Instructions Unclear with Jeff Stein aka aweirdguy

    · CLAMP

    This week, Adam & Jessy are joined by Jeff Stein aka aweirdguy. We talk about giant golf pencils, inverted nipple vases, how we think about projects, and what we do when there's a complete lack of instructions or documentation. Also lots and lots about why Autodesk Fusion is a great choice for those wanting to make on a CNC.

    Check out Jeff's work on instagram to see all his awesome projects:
    https://www.instagram.com/aweirdguy/

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout at https://chapmanmfg.com/

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Last day to enter is April 30th.

    Mentions:

    Mr Beast Ethan Carter Designs Jackman WorksAutodesk Fusion Instructables Blender Night Carver Designs Psychopedia Podcast Chris Hansen

    CLAMPmendations:

    Jeff: Berchtold Design Build's Jason Vorhees malletJessy: lonesoulsurfer on Instructables.comAdam: Tru Blu streaming service

    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Barriers to Making

    Barriers to Making

    · CLAMP

    This week, Adam, Grant & Jessy chat about barriers to making, how sneaky protective film can be, getting distracted by messes, expensive tools vs experience, and efficiency.

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout at https://chapmanmfg.com/

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Last day to enter is April 30th.

    Mentions:

    Instructables.comWood By Wright Working Hands podcast Keith of Blackthorn ConceptsChapman Mfg Co.Housemade.us IsotunesGnome Hammer Forge High Caliber CraftsmanChase on Two Wheels

    CLAMPmendations:

    Grant - High Caliber Craftsman vs a Rustoleum CanJessy - Andrea Guzzetta + Cult Podcast + Podvant GardeAdam - Icon by Do It With Dan

    Ask Us Anything question:

    "So often a day job supports the making that we love more. What's the best job for a maker? Investor?" - @warrenmatten

    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • CLAMP Challenge 2024 Edition

    CLAMP Challenge 2024 Edition

    · CLAMP

    In this episode, Adam, Grant & Jessy discuss the ethics of giving something away for free when someone else is selling it, 3D printing, house projects, our #CLAMPchallenge2024 projects, favorite books, and more!

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout at https://chapmanmfg.com/

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Last day to enter is April 30th.

    Mentions:

    Working Hands Podcast Chad's Custom CreationsOdyssey CNCBambu 3D PrintersPenelopy Bulnick Dean Duplantis Video Game GlassSun Bear Glass CraftChapman MFGHouseMade.usWork For It PodcastISOtunes


    CLAMPmendations:

    Grant: Harry Mack Does Epic 7-Minute One-Take FreestyleAdam: Blender Guru Jessy: Chi Chi Charlie


    Ask Us Anything question:

    "What is your favorite work of fiction? Why?" - @dwwoodbuilds


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Manufacture local, sell global with Joel of Chapman MFG + CLAMP Challenge Kickoff

    Manufacture local, sell global with Joel of Chapman MFG + CLAMP Challenge Kickoff

    · CLAMP

    In this episode, Grant & Jessy are joined by Joel Camassar of Chapman Manufacturing to talk about the challenges of creating products that are truly made in America. Join us to talk about supplier issues, just in time manufacturing, the importance of quality tools, and why those bulk drill bits from China are SO terrible.

    Want 15% off a Chapman Master Screwdriver Set?
    Use code CLAMP24 during checkout!


    >>>>>>>2024 CLAMP Challenge<<<<<<<

    The 2024 CLAMP Challenge is now open!

    Share your clamp-related project on Instagram and tag us @clampcast and use the hashtag #CLAMPchallenge2024. (Both for in process shots and the final project!)

    Last day to enter is April 30th.


    Mentions:

    @HouseMadeUS @katzcreates @gnomehammerforge

    CLAMPmendations:

    Joel: buy a molcajete!Jessy: Anything Goes Contest winners on InstructablesGrant: Silverhair And Sawdust

    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern



    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Career Ideas: The Early Years

    Career Ideas: The Early Years

    · CLAMP

    In this episode, Adam, Grant & Jessy catch up after missing a week of recording. Also discussed: things we wanted to be when we were kids, weaving looms, making decisions as a hormonal teenager, bigfin squid, powder coating and more!

    P.S. Jessy said the loom had been there a couple days. She meant YEARS.

    Mentions:

    Audrey Obscura Griffin MakesMaker CampStephanie from Uncommon OutpostDave BauerBigfin squid link


    CLAMPmendations:

    Grant: 65ford "Old Oven Into Shop Heater"Adam: Key & Peele "When a Text Conversation Goes Very Wrong"Jessy: Honus on Instructables & Instagram


    Ask Us Anything question:

    "Out of the things you've made, what are you most proud of?" - @time.capsule.scratch.builds


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Kutting the Pickle with Nick Tobin

    Kutting the Pickle with Nick Tobin

    · CLAMP

    In this episode, Adam & Grant are joined by Nick Tobin (@pickle_kutterz) to talk about making things you like and charging enough to make it worth it. Also discussed: toenails, closing cabinets, and getting hacked.

    Check out Nick's work:

    https://picklekutterz.comFacebookInstagram

    Mentions:

    Work For It podcastHellrazr BBQHouseMadeUncommon OutpostGnome Hammer ForgeApril Wilkerson West Coast Customs


    CLAMPmendations:

    Nicholas: Maritime Knife Supply Adam: "Everyone On This Train Is A Suspect" bookGrant: @matthiaswandel - "YouTube channel got hacked: how, timeline, and recovery."


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Adam Asks Us Anything

    Adam Asks Us Anything

    · CLAMP

    This week, Adam, Grant & Jessy get off-topic and answer some questions from Adam. Topics include: interviews, learning French, greatest fears, favorite curse words, Blockbuster, and more.

    Support CLAMP:
    Join our Discord
    Buy our Merch
    Follow us on Instagram

    Mentions:

    Jimmy Diresta Gnome Hammer Forge TFTurning

    CLAMPmendations:

    Adam - American Nightmare on NetflixJessy - Momos75 on InstructablesGrant - Andrew Richard Makes: Crafting My Ultimate Woodworking Workbench: Unveiling My Masterpiece!

    Ask Us Anything question:

    "What inspired you to start podcasting?" - @davebauerart

    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • When Things Don’t Go to Plan

    When Things Don’t Go to Plan

    · CLAMP

    In this episode of CLAMP, Adam, Grant & Jessy talk about when things don't go as planned. Can you really prepare for the unexpected?

    Support CLAMP:
    Join our Discord
    Buy our Merch
    Follow us on Instagram

    Mentions:

    Uncommon Outpost Mancrafting HouseMadeAl's Hack ShackFools with Tools podcast Gnome Hammer Forge Dave Bauer


    CLAMPmendations:

    Grant: Enshitification Adam: The Sky King Jessy: Mikeasaurus (Mike Warren)


    Ask Us Anything question:

    "What's the best pet for a maker?" - @warrenmatten


    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Making on the Road

    Making on the Road

    · CLAMP

    In this episode, Adam, Grant & Jessy discuss things they've made while away from their home/workshops.

    Support CLAMP:
    Join our Discord
    Buy our Merch
    Follow us on Instagram

    Mentions:

    Andrew SzetoDean DuplantisGnome Hammer ForgeHouseMadeDave BauerMaking Problems to Solve podcast Working Hands podcast Make What You Fear #MWYF2024Ethan CarterInstructablesMaker CuisinePhilip PullmanNick Offerman Tsugumi Ohba

    CLAMPmendations:

    Adam: Silent NightJessy: Brooklyntonia on InstructablesGrant: Grow NOLAWorks

    Ask Us Anything question:

    "Who is your favorite author? Why?" - @dwwoodbuilds

    Thank you to our top patrons:

    Chad's Custom Creations David Wood from dwwoodbuildsBrad from I'm Gonna Make Joe Hrdina Scott Oram from Dad it Yourself DIY Jarrad Jenkins Miguel Angel Vilela Overall Makerworks Tripp Southern

    Support the Show.

    Where to find us:

    Adam - @makermackey on Youtube and Instagram and at makermackey.com Grant - @thegrantalexander on Youtube and Instagram and at thegrantalexander.com Jessy - @jessyratfink on Instagram CLAMP - @clampcast on Instagram , on YouTube and at clampcast.com

    Want to support CLAMP? Check out our Patreon!

    Also, big thanks to TFTurning for the theme music.

  • Laat meer zien