Afleveringen
-
Description
Required characteristics of a machine isolator
KEY TAKEAWAYS
Not all devices that are used for machine isolation are up to the job.
BEST MOMENTS
I'm going to briefly discuss the 6 main requirements for machine disconnection
VALUABLE RESOURCES
BS EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk reduction
BS EN 60204-1:2018
Safety of machinery. Electrical equipment of machines - General requirements
https://tidd.ly/3BpEEre
BS EN IEC 60947-1:2021
Low-voltage switchgear and controlgear - General rules
https://tidd.ly/3SZCx3d
PD 60417 SNAPSHOT:2013
Graphical symbols for use on equipment
https://tidd.ly/4eGqX5F
https://tidd.ly/4draJfV
BS EN IEC 60947-6-2:2023
Low-voltage switchgear and controlgear - Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
https://tidd.ly/3TNSdY2
For access to other standards
https://tidd.ly/3JWxE6t
ABOUT THE HOST
Barry Shepherd has assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992, it’s my mission to get machinery safety to the forefront of machinery design.
Feel free to connect
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Instagram
https://www.instagram.com/machinerysafetymatters/
Hosted on Acast. See acast.com/privacy for more information.
-
Description
KEY TAKEAWAYS
BEST MOMENTS
VALUABLE RESOURCES
BS EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk reduction
https://tidd.ly/4draJfV
For access to other standards
https://tidd.ly/3JWxE6t
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFFSTANDARDS10 at checkout.
Current List of Applicable standard
https://ec.europa.eu/docsroom/documents/59435
ABOUT THE HOST
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
Feel free to connect
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Instagram
https://www.instagram.com/machinerysafetymatters/
Hosted on Acast. See acast.com/privacy for more information.
-
Zijn er afleveringen die ontbreken?
-
Description
Machines operate in different modes, and there are key characteristics of changing these modes of operation if you want to ensure operator safety.
There are at least 4 key requirements that must be in place before, you change the mode of operation of a machine, and I'm going to cover them in more detail.
KEY TAKEAWAYS
When considering mode selection think about how are you going to disable the normal hazards and control the machine in a safe manner.
Remember that all 4 of these must be in place before you put it into service, this is not meant to be an order of priority but a means to help you remember the key requirements.
Think D.I.C.E.
VALUABLE RESOURCES
BS EN ISO 13851:2019
Safety of machinery. Two-hand control devices. Principles for design and selection
https://tidd.ly/46tP1G1
BS EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk reduction
https://tidd.ly/4draJfV
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFFSTANDARDS10 at checkout.
ABOUT THE HOST
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
Feel free to connect
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Instagram
https://www.instagram.com/machinerysafetymatters/
Hosted on Acast. See acast.com/privacy for more information.
-
Description
You may have heard in your organisation or business that one or two people who comes out with the following phrases: I call them Common myths around risk assessments.
KEY TAKEAWAYS
t's not my job.
Someone else has to do it.
BEST MOMENTS
You need to do this because it is your legal responsibility and obligation!
VALUABLE RESOURCES
BS EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk reduction
Direct link to the standard
EN ISO 12100 https://tidd.ly/4draJfV
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFFSTANDARDS10 at checkout.
ABOUT THE HOST
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
Feel free to connect
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Instagram
https://www.instagram.com/machinerysafetymatters/
Hosted on Acast. See acast.com/privacy for more information.
-
Description
There are multiple types of emergency stops on the market and today, I want to discuss the over-use of shrouded emergency stops on installations, and where it’s inappropriate to install one.
KEY TAKEAWAYS
Location - can you change where it is, so that it does not get inadvertently knocked?
Alternative direction - to think about how it is mounted, and the way in which it is facing.
Size of pushbutton - can you change it to a smaller size so that it does not get knocked?
Type - can it be changed for a wire rope style or something equally suitable?
VALUABLE RESOURCES
BS EN ISO 13850:2015 - Safety of machinery. Emergency stop function. Principles for design
Direct Link to the standard
https://tidd.ly/3WKfjAy
For access to other standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout
ABOUT THE HOST
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
Feel free to connect
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Instagram
https://www.instagram.com/machinerysafetymatters/
Hosted on Acast. See acast.com/privacy for more information.
-
Description
When you add a machine into an existing system it will more often than not have it's own emergency stop, and a decision on whether or how to integrate it into the existing system will have to be made. This podcast aims to address this situation.
KEY TAKEAWAYS
P is for Process
E is for Exposure
A is for adjacent hazards
R is to recognise hazardous situations
L is for the Layout of the machine.
VALUABLE RESOURCES
BS EN ISO 13850:2015 - Safety of machinery. Emergency stop function. Principles for design
https://tidd.ly/3WKfjAy
For a 10% discount use AFF10OFF at checkout
ABOUT THE HOST
Barry Shepherd has assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
Feel free to connect
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Instagram
https://www.instagram.com/machinerysafetymatters/
Hosted on Acast. See acast.com/privacy for more information.
-
Description
If I modify the machine, will I need to re CE mark it? Well, the short answer to that is - it depends,
KEY TAKEAWAYS
The 4 requirement of assemblies of machinery listed.
BEST MOMENTS
THe 4 different scanario's for modifying machinery explained
VALUABLE RESOURCES
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout
ABOUT THE HOST
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
Feel free to connect
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Instagram
https://www.instagram.com/machinerysafetymatters/
Hosted on Acast. See acast.com/privacy for more information.
-
Description
This is going to be a deep dive into what a guard is, the required characteristics, the types, how to choose and where to get more information, for creating your guard design.
KEY TAKEAWAYS
Guards come in all sorts of shapes and sizes, and are defined as providing protection by a physical barrier, some are obvious and some are not so.
A guard doesn't necessarily have to be painted a certain colour, like red or yellow.
BEST MOMENTS
There are 6 key characteristics that all guards must have, without anyone of these it simply can't be classed as a guard.
Guard physical barrier, designed as part of the machine to provide protection
NOTE 1 A guard may act either
⎯ alone, in which case it is only effective when “closed” (for a movable guard) or
“securely held in place” (for a fixed guard), or
⎯ in conjunction with an interlocking device with or without guard locking, in which case protection is ensured whatever the position of the guard.
VALUABLE RESOURCES
To purchase the latest standards
EN ISO 12100 https://tidd.ly/4draJfV
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout
ABOUT THE HOST
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
Feel free to connect
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Instagram
https://www.instagram.com/machinerysafetymatters/
Hosted on Acast. See acast.com/privacy for more information.
-
I'm going to walk you through the first 10 considerations for inherent safe machinery design.
1 Geometric Factors - Shapes
2 Physical Aspects
3 Taking into account general technical knowledge of machine design
4 - Choice of appropriate technology
5 - Applying principle of positive mechanical action
6 - Provisions for stability
7 - Provisions for maintainability
8 - Observing ergonomic principles
9 - Electrical hazards
10 -Pneumatic and hydraulic hazard
VALUABLE RESOURCES
To purchase the latest standards
For a 10% discount use AFF10OFF at checkout.
EN ISO 12100 https://tidd.ly/4draJfV
Link to the list of the current standards in use today
https://ec.europa.eu/docsroom/documents/59435
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
How to approach hazards and apply the hierarchy of controls
KEY TAKEAWAYS
· When faced with a hazard on a machine, it is really important to know how to manage those hazards.
· However there are times when the machine cannot run slower or have forces that a below hazardous limits and for it to function as a machine due to commercial reasons.
BEST MOMENTS
· The last two of the hierarchy of controls are really the last resort to be used as a primary control but will often be used to enhance other control measures.
· The machinery directive or regulations uses the three step method, and the hierarchy of controls can be broken down
VALUABLE RESOURCES
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
BS EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk reduction
Direct link to the standard
EN ISO 12100 https://tidd.ly/4draJfV
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
This podcast is going to describe what information that the manufacturer needs to provide to the user of the machinery.
KEY TAKEAWAYS
· There are 4 general principles when it comes to drafting instructions.
· Try and avoid technical jargon, by making the layout clear and easy to understand.
BEST MOMENTS
· Drafting information is a fundamental part of the design of the machine
· “sensorial saturation”, which is when too many alarms are triggered at the same time
VALUABLE RESOURCES
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
This show is about the 8 essential features of a Declaration of Incorporation or DOI.
KEY TAKEAWAYS
· With the right kind of knowledge of what to look for you will be able to gain or provide confidence in the product you are buying or selling.
· Once you know what to look for it is easy to spot something that might give you problems further down the line.
BEST MOMENTS
· Whether you are a manufacturer or a purchaser of the machine the Declaration is extremely important and needs to be created and read very seriously.
· Sometimes it is not always possible or even practical to produce a compete machine.
VALUABLE RESOURCES
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
User responsibilities, and what you must do as an owner and provider of the work equipment.
KEY TAKEAWAYS
· There are many thing to consider when providing, or using equipment for work, and with that comes a lot of responsibility and also legal obligations.
· First of all you have to recognise, that you as a provider of the equipment, are duty bound to ensure that your employee's are safe.
· As a provider of work equipment, you must inspect it after it has been installed and before being put into service for the first time, or assembled at new location.
BEST MOMENTS
· You cannot discharge this responsibility onto the manufacturers, you as a provider of this equipment must understand these obligations.
· If you employ five or more people you shall record the risk assessment and any significant findings.
· The aim of the training is to close the gap between what they know now, and what level required to operate the machinery,
VALUABLE RESOURCES
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
Managing for Health and Safety - HSG 65 as mentionedi in the episode
https://www.hse.gov.uk/pubns/books/hsg65.htm
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
The 10 essential characteristics that need to be present on the declaration of conformity
KEY TAKEAWAYS
· One of the most important documents you will look over, is the Declaration of Conformity.
· It's not something to be shoved in a drawer without reading it
BEST MOMENTS
· Once you know what to look for it is easy to spot something that might give you problems further down the line
· As a receiver of the equipment it is essential that you are diligent in your choice of machinery, if you get this wrong then you could end up with something that is not as safe and compliant as you first thought.
VALUABLE RESOURCES
NANDO - Database for Notified bodies
https://webgate.ec.europa.eu/single-market-compliance-space/#/notified-bodies
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
ABOUT THE HOST
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
How to approach risk assessments for machinery safety.
KEY TAKEAWAYS
· The very first thing we must do is to is get a feel for the machine
· How you determine where a score sits in relation to the level of risk, is your risk profile.
BEST MOMENTS
· If the process of carrying out a risk assessment creates a situation of fear of challenge, or confusion, then it can end up doing more harm than good.
· A subjective risk assessment might identify unrealistic scenarios that are not foreseeable or practicable
· The risk assessment will determine what that initial level of risk is, and the evaluation will determine whether or not to proceed to the next level
· By the very nature of having a group of people assess a hazard, it removes the subjectivity from the issue.
VALUABLE RESOURCES
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
KEY TAKEAWAYS
· Every machine that claims any sort of conformity must at the very least have a nameplate on it.
· There are certain characteristics that must be present on it.
· As soon as you physically receive your machine you need to check that the paperwork matches the actual machine and there are simple checks that you can make to understand and get a feel for what you have purchased.
BEST MOMENTS
· Without the nameplate there will at some point be doubt between the documentation you have and the machine it refers to.
VALUABLE RESOURCES
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
KEY TAKEAWAYS
· For the design of machinery, not only are there are many different titles of standards but there are also different standard types
· Apart from a name and number which might be obvious to most people, they have an extra classification or type as they are known.
BEST MOMENTS
· Used in the correct way and you will not only have a safe design, but you will also be able to presume conformity to the appropriate directive or regulations.
· There is no need to ever guess how to design machines,
VALUABLE RESOURCES
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
EN ISO 12100 - BS EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk reduction
https://tidd.ly/44OM1m2
EN ISO 22100 - PD CEN ISO/TR 22100-1:2021
Safety of machinery. Relationship with ISO 12100. How ISO 12100 relates to type-B and type-C standards
https://tidd.ly/3rOdEwR
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
Your role in the machinery life-cycle, what they are, and how your responsibilities could change.
KEY TAKEAWAYS
· When considering your role look at the short term involvement, what is your immediate function with this machine?
· A user will be a person who will benefit from the function of the machinery as intended by the manufacturer.
BEST MOMENTS
· As an importer you must ensure that the product isn't sold or advertised unless it meets conformity and that it has the appropriate markings.
· If you install equipment you must follow the manufacturer's instructions. But you have a responsibility to ensure that if you are altering an existing machine or installation that it is safe.
Further Reading and Valuable Resources
HSE Guidance
https://www.hse.gov.uk/work-equipment-machinery/are-you.htm
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
The most commonly used definitions for machinery compliance.
KEY TAKEAWAYS
· Having a grasp of the basic definitions used in machinery safety and compliance, sets you up for a deeper understanding of the process.
BEST MOMENTS
· If you can remember and appreciate the following brief definitions, when they come up in the near future, you will already know more than most.
· ‘reasonably foreseeable misuse’ means the use of machinery in a way not intended in the instructions for use, but which may result from readily predictable human behaviour.
VALUABLE RESOURCES
For access to standards
https://tidd.ly/3JWxE6t
For a 10% discount use AFF10OFF at checkout.
ABOUT THE HOSTS
Barry Shepherd assessed 1000’s of machines across the globe in all multiple industries since 2010. With a strong passion for Engineering since 1992.
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
Hosted on Acast. See acast.com/privacy for more information.
-
Description
What machinery risk assessments are and importantly what they are not.
KEY TAKEAWAYS
· A risk assessment should never be treated as a box ticking exercise
· The aim of the risk assessment process, is to assess the scenario's, in which the machine could become dangerous.
· It is this risk assessment that drives the solution
BEST MOMENTS
· Different people see different things, so it's really important that everyone has an opportunity to contribute to the process.
Risk assessments are not a one stop process, where you do it once, stick it on a hard drive then never look at it again.
· It sets you ahead of the competition who might not go as deep as you will in your design.
Valuable Resources
For a 10% discount use AFF10OFF at checkout.
BS EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk reduction
Direct link to the standard
EN ISO 12100 https://tidd.ly/4draJfV
For access to other machinery standards
https://tidd.ly/3JWxE6t
CONTACT METHOD
LinkedIn
Twitter
https://twitter.com/MachinerySafety
Join the Facebook group
https://www.facebook.com/MachinerySafetyMatters
ABOUT THE HOSTS
Barry Shepherd has assessed 1000’s of machines across the globe in multiple industries since 2010. With a strong passion for Engineering since 1992.
Hosted on Acast. See acast.com/privacy for more information.
- Laat meer zien
