Afleveringen
-
It’s Tax Day on this episode of the Talking with One Voice podcast. Show co-hosts Omar Nashashibi, John Guzik, Paul Nathanson, and Caitlin Sickles talk about the challenges that the much-awaited tax bill is facing in the Senate, with opposition from Senate Republicans and a limited number of in-session days for Congress. Then, the team tackles a couple of important pending regulations including the worker walk-around rule and overtime rule from OSHA. Tune in also for a brief discussion of the 2024 election and the growing number of states where abortion – a high mobilization issue – will be on the ballot.
-
This week, Omar and Paul discuss why Republicans are in no hurry to take up the House-passed tax bill, Speaker Johnson cuts a deal on government funding resulting in threats to his leadership and House GOP resignations. Plus Ukraine funding and emergency funding for the Francis Scott Key bridge.
-
Zijn er afleveringen die ontbreken?
-
Show co-hosts Omar Nashashibi and John Guzik of The Franklin Partnership and Paul Nathanson and Caitlin Sickles of Bracewell gather in the studio the morning after Biden and Trump each secured enough delegates to clinch their parties’ nomination. The group talks about President Biden’s final State of the Union before the election and other Hill happenings including government spending and the tax bill (with its important provisions for manufacturers). The team also talks trade tension with Mexico and the impact on the steel industry.
-
In this episode, co-hosts Omar Nashashibi, Caitlin Sickles, and Paul Nathanson stare down another potential government shutdown with budget brinkmanship on Capitol Hill threatening efforts at a deal to fund critical government agencies and initiatives. But, while those battles wage on, the group talks about some areas of consensus that matter for manufacturers including workforce-related legislation and potential trade packages. The conversation turns to politics last, covering what Nikki Haley's refusal to walk away might mean while a Biden-Trump rematch feels ever more inevitable.
-
In this episode, co-hosts Omar Nashashibi, John Guzik, Paul Nathanson, and Caitlin Sickles discuss the state of play on Capitol Hill, including how disorganization and gridlock are holding up appropriations bills and foreign policy packages like Ukraine aid. The group also considers how former President Trump is driving policy decisions among Republicans in Washington - and the opinions of voters around the country. Listen for insight on the prospects in the Senate for the tax bill that has already passed the House with important provisions for manufacturers - and hear how manufacturers can make their voices heard.
-
In this special episode, Talking with One Voice combines efforts with Bracewell's The Lobby Shop podcast to produce a one-of-a-kind episode analyzing the prospects for the Tax Relief for American Families and Workers Act of 2024 that contains the reinstatement of R&D expensing, 179 expensing and other important provisions for manufacturers long lobbied for by PMA and NTMA’s advocacy team in DC. The episode features One Voice’s Omar Nashashibi and The Lobby Shop's Liam Donovan, two of the best political tax policy analysts in the business. They go back and forth, taking a deep dive into what to watch with bicameral tax framework. You’ll also hear some familiar voices as Paul Nathanson and Caitlin Sickles are co-hosts on both shows.
-
Paul Nathanson joins Omar Nashashibi and John Guzik for the show’s first episode of 2024. The group starts with the status of the bicameral, bipartisan tax framework that could benefit manufacturers in many ways from R&D expensing to bonus depreciation. Hear what the One Voice team is watching as signs of process on this meaningful tax package. Keep listening for a discussion of Speaker Johnson’s tenuous majority and its impact on must-pass government spending legislation. The group also provides an update on the Labor Department’s proposed changes to government registered apprenticeships, a program that is important for many manufacturers. Finally, the team tackles the 2024 race and the (slim) likelihood of any Trump challenger making an impact.
-
The One Voice Team gathers to close out the year and discuss the growing list of bills Congress needs to pass and how the push of self-imposed deadlines to January impacts the ability to get things done. The team also discusses the stalled tax extender negotiations and how this impacts R&D, bonus depreciation and interest deductibility for manufacturers. The group talks about the EU blinking on steel tariff negotiations and Nippon Steel’s purchase of US Steel. Finally, the team quizzes Omar about his admission that he reads the Saturday edition of the Wall Street Journal and his preference for hard copies of newspapers.
-
This week, the team reviews the work Congress needs to get done before going home for the holidays, including funding the government, explain the possible two-step government shut down in January and what every manufacturer who uses the R&D tax credit needs to know as a result of continued Congressional inaction. The team discuss the never-ending steel tariff spat between the US and EU and the upcoming four year review of Section 301 tariffs on China.
-
Now that the House is back in business, the One Voice team analyzes the long to do list for Congress, including funding the government, and the prospects for passing a tax package that is important to manufacturers. The team also discusses proposed regulations by NLRB and OSHA and then pivots to talking about what the off year elections results could mean for the presidential and congressional races and 2024 elections.
-
The One Voice team unpacks the latest in the House Republican quest for a new Speaker. The group discusses Representative Mike Johnson and his potential priorities as well as the important legislation impacting manufacturers that hangs in the balance. The conversation concludes with a discussion about the latest in ongoing trade negotiations.
-
In this special episode, Talking with One Voice co-host Caitlin Sickles speaks with National Tooling and Machining Association Chairman Gillen Young. Gillen wears many hats as Chairman of NTMA and an executive with both Custom Tool in Cookeville, TN and with AT&T. Gillen talks about the impact of policy, the power of advocacy, and the importance of making the voices of small- and medium-sized manufacturers heard. This interview is the first in a series highlighting One Voice leaders.
-
The One Voice team analyzes the race for Speaker and the impact of the House turmoil on the Congress’s ability to fund the government before the November 17 deadline. The team also discusses the OSHA Heat Rule and the upcoming new overtime rule that will impact the entire workforce. Finally, the team provides an update on US-EU negotiations on replacing the Section 232 steel and aluminum tariff.
-
The clock is ticking down to a federal government shutdown. The One Voice team gives a play-by- play of what to watch and what the implications of even a short shutdown might be for manufacturers in every sector from aviation to agribusiness. The group also discusses the ongoing UAW strike and ramifications for auto suppliers as well as the latest in OSHA’s efforts to regulate how manufacturers handle heat in their facilities. Plus, One Voice gives a plug for participation in MFG Day 2023.
-
The One Voice team discusses the potential impact on manufacturers who supply the auto industry of a UAW strike. The group then turns to Congress's return and how the House will deal with must-pass legislation and the added complication of the decision by Speaker McCarthy to allow the House to move forward with an effort to impeach Presiden Biden. Next is the latest information on the OSHA heat rule and new overtime rules - two potential rules that will directly impact just about every manufacturer, and the latest on US-EU negotiations on a new agreement on steel and aluminum.
-
This week, the One Voice team meets to discuss the Congressional agenda when Congress returns from recess including the upcoming Appropriations fight that could lead to another government shutdown. The team then pivots to the Administration’s Unified Regulatory Agenda and its impact on manufacturers and also a surprising deal struck during Prime Minister Modi’s visit to Washington to end a trade dispute centered on the Sec 232 steel and aluminum tariffs.
-
With the debt ceiling bill passed, Washington is breathing a sigh of relief. But the One Voice team explains why no one should get too comfortable. Listen also for information on tax legislation including the all-important R&D expensing provisions that matter for manufacturers. The conversation closes with coverage of politics, both the latest indictments of former President Donald Trump and the Supreme Court’s ruling on voting rights and the drawing of Congressional districts which stands to impact races in 2024 and beyond.
-
This week, the team discusses the latest on the debt ceiling negotiations and what exactly is the “14th amendment” option (and is it really an option). The discussion then turns to prospects for an R&D expensing fix and the latest on trade and China.
-
The One Voice team discusses the status of the debt ceiling negotiations, including Speaker McCarthy's efforts to unify his caucus on the Republicans' debt ceiling bill, and how the recent departure of a certain Fox anchor may impact the negotiations. They then turn to plans by members from both parties in Congress to focus on China, including Congressional efforts to ensure that Chinese companies don't benefit from the grants and tax incentives provided by the US government to boost the renewable energy sector. Lastly, with President Biden's announcement that he will run for re-election, the group discusses the challenges for both parties in the upcoming 2024 presidential election campaign.
-
The One Voice team discusses the recent legislative fly-in to Washington, DC by manufacturers from NTMA and PMA, the advocacy campaign to reinstate full deduction of R&D expensing and explain the Biden Administration's plan to turn Section 232 steel tariffs into "carbon tariffs. Also tune in for their chat about the use of paid and unpaid "line standers" that lobbyists use on Capitol Hill.
- Laat meer zien