Afleveringen
-
In this episode, Mark quizes the guys with another round of trivia...Drew tries to redeem himself. Bruce talks about snacks he can't resist around Christmas time and going to see The Grinch in the theater with the family. Drew has the first 3D printing failure. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
-Brent Jarvis https://bit.ly/2OJL7EV
-Ray Jolliff
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Chris Simonton
-Maddux Woodworks http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Bruce Clark
-Will White
-Cody Elkins (creator of the Jenny Bit)
-Andy @ Mud Turtle Woodworks
-Damon Moran
-Monkey Business Woodworks
-Rich from Woodnote Studio
-AC Nailed It
-Joe Santos from Designer's Touch Kitchen & Bath Studio
-Aaron Yelton
-Chad Green
-Ryan Talley
-Trevor
-Mark Herrick @ Empty Nest Woodworks
-Not That Aaron, the other one
Support our sponsors:TOOL CODES:
-MagSwitch: “WBAT”
-SurfPrep: “FISHER10”
-Bumblechutes: “FISHER10”
-Starbond: “BRUCEAULRICH”
-Brunt Workgear: “GUNFLINT10”
-Rotoboss: “GUNFLINT”
-Merlin Moisture Meters: “FISHER10”
-Montana Brand Tools: “GUNFLINT10”
-Monport: “GUNFLINT6”
-Stone Coat Epoxy: Gunflint
-MAS Epoxy: FLINT
-YesWelder: GUNFLINT10
-Millner-Haufen Tool Co: “ULRICH20” for 20% off
-SmartSquareTools.com: “FISHER10”
-Camel City Mill: GUNFLINT10
-Arbortech Tools: “BRUCEAULRICH” for 10% off
-HighCountryTool.com: “FISHER10” for 10% off
-Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark has a dog kennel update and burns black walnut in his furnace. Bruce almost breaks a bit on the CNC. Drew helps someone cut out an amazingly figured clock on his OneFinity. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
-Brent Jarvis https://bit.ly/2OJL7EV
-Ray Jolliff
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Chris Simonton
-Maddux Woodworks http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Bruce Clark
-Will White
-Cody Elkins (creator of the Jenny Bit)
-Andy @ Mud Turtle Woodworks
-Damon Moran
-Monkey Business Woodworks
-Rich from Woodnote Studio
-AC Nailed It
-Joe Santos from Designer's Touch Kitchen & Bath Studio
-Aaron Yelton
-Chad Green
-Ryan Talley
-Trevor
-Mark Herrick @ Empty Nest Woodworks
-Not That Aaron, the other one
Support our sponsors:TOOL CODES:
-MagSwitch: “WBAT”
-SurfPrep: “FISHER10”
-Bumblechutes: “FISHER10”
-Starbond: “BRUCEAULRICH”
-Brunt Workgear: “GUNFLINT10”
-Rotoboss: “GUNFLINT”
-Merlin Moisture Meters: “FISHER10”
-Montana Brand Tools: “GUNFLINT10”
-Monport: “GUNFLINT6”
-Stone Coat Epoxy: Gunflint
-MAS Epoxy: FLINT
-YesWelder: GUNFLINT10
-Millner-Haufen Tool Co: “ULRICH20” for 20% off
-SmartSquareTools.com: “FISHER10”
-Camel City Mill: GUNFLINT10
-Arbortech Tools: “BRUCEAULRICH” for 10% off
-HighCountryTool.com: “FISHER10” for 10% off
-Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
Zijn er afleveringen die ontbreken?
-
In this episode, Mark is almost done with the dog kennel. He used Kreg's MortiseMate and likes it a lot. Drew is designing stuff for his new 3D printer. Bruce exposes domino tennons in his cutting board. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
-Brent Jarvis https://bit.ly/2OJL7EV
-Ray Jolliff
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Chris Simonton
-Maddux Woodworks http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Bruce Clark
-Will White
-Cody Elkins (creator of the Jenny Bit)
-Andy @ Mud Turtle Woodworks
-Damon Moran
-Monkey Business Woodworks
-Rich from Woodnote Studio
-AC Nailed It
-Joe Santos from Designer's Touch Kitchen & Bath Studio
-Aaron Yelton
-Chad Green
-Ryan Talley
-Trevor
-Mark Herrick @ Empty Nest Woodworks
-Not That Aaron, the other one
Support our sponsors:TOOL CODES:
-MagSwitch: “WBAT”
-SurfPrep: “FISHER10”
-Bumblechutes: “FISHER10”
-Starbond: “BRUCEAULRICH”
-Brunt Workgear: “GUNFLINT10”
-Rotoboss: “GUNFLINT”
-Merlin Moisture Meters: “FISHER10”
-Montana Brand Tools: “GUNFLINT10”
-Monport: “GUNFLINT6”
-Stone Coat Epoxy: Gunflint
-MAS Epoxy: FLINT
-YesWelder: GUNFLINT10
-Millner-Haufen Tool Co: “ULRICH20” for 20% off
-SmartSquareTools.com: “FISHER10”
-Camel City Mill: GUNFLINT10
-Arbortech Tools: “BRUCEAULRICH” for 10% off
-HighCountryTool.com: “FISHER10” for 10% off
-Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark has a new way of keeping birds. Bruce might be starting his candle empire. Drew tries to pay for dinner. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
-Brent Jarvis https://bit.ly/2OJL7EV
-Ray Jolliff
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Chris Simonton
-Maddux Woodworks http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Bruce Clark
-Will White
-Cody Elkins (creator of the Jenny Bit)
-Andy @ Mud Turtle Woodworks
-Damon Moran
-Monkey Business Woodworks
-Rich from Woodnote Studio
-AC Nailed It
-Joe Santos from Designer's Touch Kitchen & Bath Studio
-Aaron Yelton
-Chad Green
-Ryan Talley
-Trevor
-Mark Herrick @ Empty Nest Woodworks
-Not That Aaron, the other one
Support our sponsors:TOOL CODES:
-MagSwitch: “WBAT”
-SurfPrep: “FISHER10”
-Bumblechutes: “FISHER10”
-Starbond: “BRUCEAULRICH”
-Brunt Workgear: “GUNFLINT10”
-Rotoboss: “GUNFLINT”
-Merlin Moisture Meters: “FISHER10”
-Montana Brand Tools: “GUNFLINT10”
-Monport: “GUNFLINT6”
-Stone Coat Epoxy: Gunflint
-MAS Epoxy: FLINT
-YesWelder: GUNFLINT10
-Millner-Haufen Tool Co: “ULRICH20” for 20% off
-SmartSquareTools.com: “FISHER10”
-Camel City Mill: GUNFLINT10
-Arbortech Tools: “BRUCEAULRICH” for 10% off
-HighCountryTool.com: “FISHER10” for 10% off
-Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark's cutting boards are flying off the shelves. Bruce plants some fig trees and cuts metal. Drew is about to be in the 3D printer game. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
-Brent Jarvis https://bit.ly/2OJL7EV
-Ray Jolliff
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Chris Simonton
-Maddux Woodworks http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Bruce Clark
-Will White
-Cody Elkins (creator of the Jenny Bit)
-Andy @ Mud Turtle Woodworks
-Damon Moran
-Monkey Business Woodworks
-Rich from Woodnote Studio
-AC Nailed It
-Joe Santos from Designer's Touch Kitchen & Bath Studio
-Aaron Yelton
-Chad Green
-Ryan Talley
-Trevor
-Mark Herrick @ Empty Nest Woodworks
-Not That Aaron, the other one
Support our sponsors:TOOL CODES:
-MagSwitch: “WBAT”
-SurfPrep: “FISHER10”
-Bumblechutes: “FISHER10”
-Starbond: “BRUCEAULRICH”
-Brunt Workgear: “GUNFLINT10”
-Rotoboss: “GUNFLINT”
-Merlin Moisture Meters: “FISHER10”
-Montana Brand Tools: “GUNFLINT10”
-Monport: “GUNFLINT6”
-Stone Coat Epoxy: Gunflint
-MAS Epoxy: FLINT
-YesWelder: GUNFLINT10
-Millner-Haufen Tool Co: “ULRICH20” for 20% off
-SmartSquareTools.com: “FISHER10”
-Camel City Mill: GUNFLINT10
-Arbortech Tools: “BRUCEAULRICH” for 10% off
-HighCountryTool.com: “FISHER10” for 10% off
-Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark melts some HDPE. Bruce smashes some apples. Drew designs a bathroom cabinet. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
-Brent Jarvis https://bit.ly/2OJL7EV
-Ray Jolliff
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Chris Simonton
-Maddux Woodworks http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Bruce Clark
-Will White
-Cody Elkins (creator of the Jenny Bit)
-Andy @ Mud Turtle Woodworks
-Damon Moran
-Monkey Business Woodworks
-Rich from Woodnote Studio
-AC Nailed It
-Joe Santos from Designer's Touch Kitchen & Bath Studio
-Aaron Yelton
-Chad Green
-Ryan Talley
-Trevor
-Mark Herrick @ Empty Nest Woodworks
-Not That Aaron, the other one
New:
-Aaron Yelton
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark published his outfeed table video. Watch here: https://youtu.be/gDpW3hVYE1w?si=epn8SGB71WSi0628 . Bruce makes some ornaments. Pick some up on his website. Drew finishes the vanity and still doesn't get to film the countertop being cut. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
-Brent Jarvis https://bit.ly/2OJL7EV
-Ray Jolliff
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Chris Simonton
-Maddux Woodworks http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Bruce Clark
-Will White
-Cody Elkins (creator of the Jenny Bit)
-Andy @ Mud Turtle Woodworks
-Damon Moran
-Monkey Business Woodworks
-Rich from Woodnote Studio
-AC Nailed It
-Joe Santos from Designer's Touch Kitchen & Bath Studio
-Chad Green
-Ryan Talley
-Trevor
-Mark Herrick @ Empty Nest Woodworks
-Not That Aaron, the other one
New:
-Randall Brown
-Mark Herrick
-Ashley GoodwillSupport our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark sits out in the rain & lasers an urn. Bruce is done with craft shows & published a video about the live edge serving board. Watch here: https://youtu.be/zj_EVogkjgg?si=H_mRhcHj3vXec5Ke . Drew finished up the vanity. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
-Andy @ Mud Turtle Woodworks
-Damon Moran
-Joe Santos
-Trevor
-Ryan Talley
New:
-Seth Williams
-Deby Clover
-Ryan Talley
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark is itching to go hunting. He's racing to get his new outfeed table built and video done. Bruce publishes a video about making a huge walnut butcher block countertop. Watch it here: https://youtu.be/fmY3PKyH9Fo?si=ovtx95KtYPPRzW8n . Drew's wife has an interesting shopping trip and he publishes his turning video in collaboration with Peter Brown. Watch here: https://youtu.be/51sfnfnsPtg?si=kWrl3NZplSUoAIPM . Plus, a ton more!
This episode is sponsored by Oneida Air Systems! They want you to know about their Dust Deputy Low-Pro separator, available now at Lowe's! They are giving 3 of these away to our listeners...enter here: https://bit.ly/4dL5Huy
GIVEAWAY ANNOUNCEMENT!
Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
-Andy @ Mud Turtle Woodworks
-Damon Moran
-Joe Santos
-Trevor
New:
-Joe Santos
-Trevor
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark releases an apple-launchingly good video and has quite the weekend. Bruce sees a new critter. Drew gets a visit from Peter Brown of YouTube fame. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
-Andy @ Mud Turtle Woodworks
-Damon Moran
New:
-Terry W.
-Tree Carcass Tweaking
-Evan Dunker
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark released the bow stand video and talks more about his new plasma cutter and welder. Bruce hasn't made a ton recently, but he made some bronchitis. Plus, he got to work in the shop and on the car with his oldest boy. Drew made some pretty good progress on the renovation up north. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
-Andy @ Mud Turtle Woodworks
-Damon Moran
New:
Built by Gus
Michael Cogdill
Not that Aaron, the Other One
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark forgets about a mantle. Bruce turns into Barry White. Drew prepares to start on a big remodel project. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
-Andy @ Mud Turtle Woodworks
-Damon Moran
New:
Ryan
Rob Harrison
New:
Andy @ Mud Turtle Woodworks
Damon Moran
Kevin Griffin
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark comes up with a new currency. Bruce is part of a grazing table. Drew fixed his jointer. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
-SPONSORED BY ONEIDA AIR SYSTEMS:
They will be demoing a Supercell at the Texas Woodworking Festival November 9-10, 2024 and are there to talk at the pre-party as well. So if your listeners are planning to attend and want to see how the system performs to swing by the Oneida Air Booth.
Texas Woodworking Festival: https://shorturl.at/SKexY
-This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
New:
Ryan
Rob Harrison
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark makes wooden T-Track. Bruce actually published videos! Go watch them here: https://youtu.be/6nWOx_9kVyA?si=raOIy1Tu6nJxiQNz & https://youtu.be/Lgqw8qP43rM?si=wwgKNklZFUJWNmmF . Drew cross-threaded his jointer blade. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our September giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to JESSEM for sponsoring September's giveaway with a package worth over $150!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark gets the cabin ready for winter. Bruce let's his neighbor go shopping for home goods in his office. Drew is just about done with the kitchenette video/project. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our September giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to JESSEM for sponsoring September's giveaway with a package worth over $150!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
Wagner Meters: https://www.wagnermeters.com/?ref=208
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark ponders unnecessary walnut t-track. Bruce tries to get a proof approved. Drew hates people. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our September giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to JESSEM for sponsoring September's giveaway with a package worth over $150!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark explodes a willow tree. Bruce moves a giant laser. Drew talks to a countertop guy. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our September giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to JESSEM for sponsoring September's giveaway with a package worth over $150!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark comes back to the land of the living. Bruce builds stuff at church. Drew ducks out early. Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our August giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to KREG TOOL for sponsoring August's giveaway with a package now worth $250+!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark messes with V Carve Pro in a cloud. Bruce messes up a picture frame. Drew keeps finding faces...everywhere! Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our August giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to KREG TOOL for sponsoring August's giveaway with a package worth $170!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
-Chad Green
New:
Chad Green
Ron Brewer
Jarrod LiPuma @LLBuilds_Woodworking
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
-
In this episode, Mark catches the crud from the trip. Bruce wants an Epilogue laser. Drew dishes out some trivia...and from listeners live at IWF! Plus, a ton more!
GIVEAWAY ANNOUNCEMENT!
Listen for details about our August giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to KREG TOOL for sponsoring August's giveaway with a package worth $170!
T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothingSUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
This episode is also sponsored by Oneida Air Systems! Check out all of their dust collection systems and even get a free consultation: https://www.oneida-air.com(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Become a patron of the show!
http://patreon.com/webuiltathing
OUR TOP PATREON SUPPORTERS
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks
-AC Nailed It
New:
Rich from Woodnote Studio
Support our sponsors:MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”
Stonecoat: "Gunflint" gets you 10% off
MAS Epoxy: FLINT
YesWelder: GUNFLINT10
Millner-Haufen Tool Co: "ulrich20" gets you 20% off
We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf
https://amzn.to/2TUrCr2
ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: [email protected]
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesignsMusic by: Jay Fisher (Thanks, Jay!)
- Laat meer zien
